BEHA UNITEST 9004 Manual De Instrucciones página 16

UNITEST 9005:
1. Digital LCD:
display for over-
load (OL), pola-
rity, units, DC
and AC measure-
ment values, dis-
charged battery.
1a. Analogue bar-
graph display.
2. Measurement
mode selection
switch:
for selecting the
appropriate mea-
surement mode.
3. Input socket for
current measure-
ment up to 15 A.
Attention !
Respect current
measurement
references.
4. Reference input for
voltage, current and
resistance measure-
ments (COM).
5. Input socket for voltage,
resistance and current
measurement
up to 320 mA.
6. Battery casing on rear of instrument.
7. "HOLD" button: memorizes displayed value.
If the instrument has been switched off via auto-power-off
function, the multimeter can be reactivated by pressing the
Hold button.
8. Button "=/;": automatic switching between DC and AC voltage
measurement and between diode and continuity measurement.
(Automatic switching between DC and AC voltage measurement
in position "V").
9. "RANGE" button: manual measurement range selection.
Return to automatic operation when pressing the button for approx.
2 s.
16
1a
7
8
2
3
1
4
6
9
5