Liberty Hardware H70223 Manual Del Usuario

1/2" Overlay Face Frame Concealed Hinge
Parts List
• Two Euro Face Frame 6-way Adjustable Hinge
• 2 #8x1" Pan Head Wood Screws
Recommended Tools
• #2 Phillips Screwdriver
• Pencil or Scribe
• Metric Ruler
• Drill, 1/8" or 3/32" Drill Bit and 8mm Drill Bit
• Boring Bit 35mm (Forstner Bit) for hinge cup
Data
• See chart below for recommended number of
hinges per door size
• If hanging a door with a mirror or very wide
door you will need additional hinges
56"
36"
tall
2
Hinges Hinges
20" Wide
9-13 lbs 14-26 lbs
Specifications
• Door thickness should be 5/8" (16mm) or
3/4" (19mm)
Mounting Instructions
1. Marking Drill Holes for Hinge
a. Mark location of holes on cabinet door and
frame.
3 9.5
mm mm
35
mm
2. Installing Hinge to Door
a. Drill hole 12mm (15/32") deep for hinge cup
using 35mm boring bit. Do not drill through
door face.
b. Drill pilot holes for screws. Do not drill through
door face: Drill 8mm x 12mm deep hole for
dowels.
c. Insert hinge into door, A
CP3503-XXX ©2011 Liberty Hardware Manufacturing Corporation, A MASCO COMPANY
Opening 105°
92"
80"
tall
tall
3 4 5
Hinges Hinges
27-37 lbs 38-50 lbs
8mm dowel hole
45
mm
A B
Hinge H70223
tall
140 Business Park Drive • Winston-Salem, NC 27107
3. Installing Door to Cabinet
a. Open hinge to full extension
b. Connect door to cabinet as shown, B
4. Door Adjustment
Align door using following adjustment feature.
a. Lateral Adjustment allows for adjusting
door plus or minus 1.5mm side to side.
b. Horizontal Adjustment allows for adjusting
door plus or minus 1.5mm in and out.
c. Vertical Adjustment allows for adjusting
door plus or minus 2.5mm up and down.
a
b
c
Wear Safety Goggles
Portez des lunettes de sécurité
Utilice gafas protectoras
105°
1/2 in Overlay
Chevauchement
sur 12,7 mm (½ po)
Superposición
de 1/2"
Top View
Vue du dessus
Vista de arriba
www.libertyhardware.com
1-800-542-3789
1/2 in
Rev 03/24/11