Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GHG 20-63 Professional Manual Original

12 | English
heat gun. This safety measure prevents the heat gun
from being started accidentally.
Always check the heat gun, cable and plug before use.
u
Stop using the heat gun if you discover any damage.
Do not open the heat gun yourself, and have it re-
paired only by a qualified specialist using only original
replacement parts. Damaged heat guns, cables and
plugs increase the risk of electric shock.
Keep your work area well-ventilated. The
gas and steam produced during work are often
harmful to one's health.
Wear protective gloves and do not touch the nozzle
u
while it is hot. There is a risk of burns.
Do not direct the airflow at persons or animals.
u
Do not use the heat gun as a hair dryer. The outgoing
u
airflow is considerably hotter than that of a hair dryer.
Do not allow foreign objects to enter the heat gun.
u
The distance between the nozzle and the workpiece
u
depends on the material you are working on (metal,
plastic, etc.) and the intended working method. Al-
ways test the amount of air and temperature first.
If operating the heat gun in a damp environment is un-
u
avoidable, use a residual current device (RCD). Use of
an RCD reduces the risk of electric shock.
Never use the heat gun if the cable is damaged. Do not
u
touch the damaged cable and pull out the mains plug if
the cable is damaged while working. Damaged cables
increase the risk of an electric shock.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.

Technical Data

Heat gun
Article number
Rated power input
Airflow
Temperature at the nozzle outlet
Temperature measurement accuracy
– at the nozzle outlet
– on the display
1 609 92A 52W | (13.09.2021)
l/min
B)
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The heat gun is intended for deforming and welding plastic,
removing coats of paint and heating heat shrink plastic
tubes. It is also suitable for soldering and tinning, melting ad-
hesive bonding and thawing water pipes.
The heat gun is intended for handheld, supervised use.

Product Features

The numbering of the product features refers to the repres-
entation of the heat gun on the graphics page.
(1) Nozzle
(2) Heat shield, removable
(3) Storage surface
(4) On/off switch and power settings
(5) Memory preset display (GHG 23-66)
(6) Unit of measurement for temperature
(7) Thermal protection regulation symbol
(8) Fan symbol (GHG 23-66)
(9) Airflow display (GHG 23-66)
(10) Fan button (GHG 23-66)
(11) Memory button (GHG 23-66)
(12) +/– button
(13) Display
a)
(14) Surface nozzle
a)
(15) Glass protection nozzle
a)
(16) Angle nozzle
a)
(17) Reflector nozzle
a)
(18) Welding wire
a)
(19) Welding shoe
a)
(20) Reducing nozzle
a)
(21) Heat shrink plastic tube
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GHG 20-63
3 601 BA6 2..
W 2000
150/150–300/300–500
°C 50–630
±10 %
±5 %
GHG 23-66
3 601 BA6 3..
A)
2100 (2300 )
150–300/150–500
50–650
±10 %
±5 %
Bosch Power Tools