Ribbon Selection; Loading Ribbon - Tyco Electronics T200 Serie Manual Del Usuario

2.0

Ribbon Selection

Print quality and permanency on Tyco Electronics Identification products is only guaranteed if
the correct thermal transfer ribbon is used for each product. Please refer to the
"Printer/material/ribbon compatibility cross reference" found at
Tyco Electronics.
3.0

Loading Ribbon

1. Open Cover.
3. Thread the ribbon through carriage.
5. Align Notches onto Hub Spokes.
7. Align Notches onto Hub Spokes.
EIL/MAN/002: REVISION 6 Date: July 2007
www.tycoident.com
2. Pull Adhesive Strip Free on ribbon.
4. Press core onto Hub.
6. Press the take-up core on to the Hub.
8. Attache ribbon to take-up core using
adhesive strip on new ribbons or tape.
English
or contact
Page 8