Rejuvenation Mirror Classic Metal Frame Long Oval Instrucciones De Ensamblaje

NOTICE: To prevent injury and property damage from unexpected tipping of furniture,
We highly recommend installation of the anti-tip kit included with this product.
This mirror is very heavy. The mirror can be leaned against a wall, as a floor mirror or
it can be wall mounted. We strongly recommend the mirror to be secured to the wall
using the provided anti-tip kit when using as a floor mirror. Refer to the wall
mounting instructions when using as a wall mounted mirror. The two metal clips
located on the rear of the mirror are designed to be used with the anti-tip kit. Only
one of the metal clip will be used.
Tools: Pencil, Stud-Finder, Philips Screwdriver, Power Drill, Tape measure.
Hardware: (4) Mounting Brackets
(4) Zinc Screw
(2) Plastic Strap
Attaching mirror to wall studs with anti-tip kit (Most recommended method):
1. The mirror includes two metal clip located on the rear surface. One of these metal clip must end up next to a wall stud.
2. Determine where the mirror is to be placed and mark location on the wall for the mounting bracket screw holes. They should
be placed approximately 2" below the
wall stud. Use a stud finder to locate the studs within the wall.
3. Attach one mounting bracket vertically to the wall b l y inserting the (2) zinc
screws provided through the holes in the bracket and tightening securely
using screwdriver. Screws must penetrate wall studs for proper
installation.
4. Place mirror so the metal clip
on the wall.
5. Thread the end of the provided strap through the adjacent metal clip and
the small openings located in the bracket. Secure the open end of the
strap into the ratchet located at the opposite end s o that a closed loop is
formed. Tighten the strap until you hear click sounds. The mirror is now
secured to the wall and should not be able to fall. Installation of the Anti-
Tip Kit is complete.
6. To remove the strap, depress the small level that is located at the ratchet end of the strap and slide the strap out.
Care Instructions:
To clean: wipe with a soft, dry cloth. Do not use abrasive or strong chemical household cleaners. A household glass cleaner may be
used for the mirror surfaces – spray the cleaner on a clean Cloth first and then use the cloth to clean the glass. Do not spray the
cleaner directly onto the glass or frame surfaces.
www.rejuvenation.com
Mirror Classic Metal Frame Long Oval 14x72 IN OB
Anti-tip kit Installation Instructions
metal clip on the back of the mirror frame. The mounting bracket must be installed to a
on the back edge is in line with the bracket
Thank you for your purchase
Installation Instructions
Instructions d'assemblage
Instruucciones de Ensamblage