Aqua Medic Mistral 2000 Manual De Instrucciones página 5

1. Features
The Mistral membrane air pumps are designed for universal use. The housing is made from cast
aluminium and this, combined with the magnetic control system and the vibration reducing rubber
feet, results in exceptionally quiet operation.
Important note:
The pump must only be operated at the correct voltage (see type label).
2. Technical Data
Type:
Power requirements:
Power uptake:
Maximum capacity:
Capacity at 1 m (3 ft) depth (100 mbar, 1.45 psi):
Maximum pressure:
Connection pressure side:
Cable length:
Weight:
Housing:
2500
2250
2000
1750
1500
1250
1000
750
500
250
0
0 0,05
Capacity of the Mistral 2000
3. Connections
The pump is connected to the equipment it supplies via an air hose (12 mm, ½"). If ozone is to be
used, ozone resistant tubing (e. g. silicone) must be used. When operating several consumers the
distributor provided can be used. 10 consumers can be attached via a 6/4 aquarium air hose.
4. Installation
The pump should be positioned in a dry place. Care should be taken to ensure that water cannot
enter the pump when, for instance, it is switched off for aquarium maintenance or during a power
failure. There are two methods of installation:
- above the water level – see Fig. A below
-
below the water level. In this case, a reliable non-return valve must be fitted in the air line –
see Fig. B below
Ensure that the power plug can easily be reached at any time.
All manuals and user guides at all-guides.com
0,1 0,15 0,2 0,25
Druck (bar)
Mistral 2000
220 - 240 volts ~ 50 Hz
25 watts
2,500 litres/hour (approx. 660 gph)
1,600 litres/hour (approx. 422 gph)
>300 mbar, 4.35 psi
air tube 12 mm (½")
3 m
3,5 kg (7,8 lbs)
cast aluminium
0,3 0,35
5