Publicidad
FUNCTIONS
GLOBAL MIDI
MIDI channels 1 to 16. This specifies which MIDI
channel the MINIPAD will use to transmit pad
messages. This should be set to match the MIDI
channel of the DAW software application that
you're controlling. Change these settings using the
Software Editor.
TRANSPORT MIDI
MIDI channels 1 to 16, and Scene. This specifies
the MIDI channel on which MIDI messages will be
transmitted when you operate the transport buttons
(Play, Stop, Record, Loop, Rewind, Fast Forwards).
Set this to match the MIDI channel of the DAW
software application you're controlling. If you set
this to "Scene MIDI Channel," the message will be
transmitted on the Scene MIDI Channel. Change
these settings using the Software Editor.
TRIGGER PADS
The trigger pads can transmit note messages or
control change messages. For each trigger pad, you
can individually specify the assigned message, the
MIDI transmit channel, the behaviour of the trigger
pad, the note number, the control change number,
or the values transmitted when the pad turns on
or off.
Depending on its assign type, the note number
or control change number can be assigned to a
single trigger pad and transmitted. If you transmit
note messages or control change message from a
trigger pad, all of the messages will be transmitted
at the velocity or On Value/Off Value. Change these
settings using the Software Editor.
MIDI Channel [1 to 16/Global MIDI Channel]
This specifies the MIDI channel of the MIDI
messages that are transmitted when you strike the
trigger pad. If you set this to "Global MIDI Channel,"
the messages will be transmitted on the global MIDI
channel.
Assign Type [No Assign/Note/Control Change]
This specifies the type of message that will be
assigned to the trigger pad. You can disable the pad
or assign a note message, or a control change.
Pad Behaviour [Momentary/Toggle]
You can choose one of the following two types of
behaviour for the trigger pad.
Momentary
The note on or off value will be transmitted when
you press the trigger pad, and the note on or off
value will be transmitted when you release it.
Toggle
The note on or off value will be transmitted
alternately each time you press the trigger pad.
Note Number [C1 to G9/No Assign]
This specifies the note number of the note message
that is transmitted.
CC Number [0 to 127/No Assign]
This specifies the control change number of the
control change message that is transmitted.
On Value [0 to 127]
This specifies the value of the message that is
transmitted when the trigger pad turns on.
Off Value [0 to 127]
This specifies the value of the message that is
transmitted when the trigger pad turns off.
You can set this only if the assign type is set to
"Control Change."
ASSIGNABLE BUTTONS
This button transmits a control change message. You
can choose whether this button is enabled, the type
of button operation, the control change number, or
the values that will be transmitted when the button
is pressed. These MIDI messages are transmitted
on the Global MIDI Channel. Change these settings
using the Software Editor.
Assign Type [No Assign / Note/Control Change]
This specifies the type of message that will be
assigned to the button. You can disable the button
or assign a note message or a control change.
Button Behaviour [Momentary/Toggle]
Selects one of the following two modes:
Momentary
Pressing the button will send a control change
message with the on value, releasing the button will
send a control change message with the off value.
Toggle
Each time that you press the button, the control
change message will alternate between the on value
and the off value.
Note Number [C1 to G9]
This specifies the note number of the note message
that is transmitted.
CC Number [0 to 127]
Specifies the CC number of the control change
message that will be transmitted.
6
Publicidad
