AVer C20i Manual Del Usuario página 15

Intelligent Timer
20 bays for C20i are divided into 2 zones (10 bays for each zone).
Firmware
Firmware can be upgraded from the external USB type-A port via typical USB
thumb-drive. Please follow the steps below to upgrade your Firmware:
1. Prior to updating, make sure the USB thumb-drive is formatted to FAT or FAT32
filesystem
2. Copy the Firmware binary file ( *.bin) to USB thumb-drive
3. Turn OFF C20i and then insert the USB thumb-drive
4. Turn ON C20i and the Firmware upgrade will update automatically. The Power
LED will cycle through the following display RED  AMBER  GREEN 
RED.
[Note] Status LEDs are OFF during the upgrading.
9
Zone 1
Zone 2