Status Indicators - BeeWi BBX200 Manual Del Usuario

10

2.5. Status Indicators

Status
Power On
Power Off
Pairing
Dial out
In-call
Idle
Standby
music streaming
Low Battery
Charging
Charging Completed
3. USING THE PRODUCT AS A TRANSmITTER
3.1. Power On / Power Off
- make sure the rotation switch is in TX position and plug
the audio cable into the audio jack and an audio source
such as mP3 player, computer, iPod or else.
- To power on, press and hold the mFB key until the red
LED start blinking.
- To power off, press and hold the mFB key until the blue
and red indicators are both on for two seconds.
3.2. TX Pairing
- make sure the headphones or speaker you would like to pair the
Transceiver with is in "Pairing" mode (refer to the headphones or speaker
user manual).
- At first used, turn on and wait until BBX200 connecting mode times
out. It will automatically connect to any previously paired devices when
All manuals and user guides at all-guides.com
LED
Blue
Red + Blue
Blue
Blue
Blue
Blue
Blue
Blue
Red
Red
Red
Descriptions
Blinks 3 times alternately
Lights on for 2 seconds simultaneously
Blinks rapidly
Blinks 2 times every second
Blinks 3 times every 4 seconds
Blinks once every 2 seconds
Blinks once every 4 seconds
Blinks 2 times every 4 seconds
Blinks once every 2 seconds
Lights on
Lights off
ENGLISH