Power Supply - Beta 1760TMC 600 Instrucciones

6. Power supply

Press the back / on button for 3 seconds to switch the thermal image
device on or off. This device is powered by 3 AAA dry alkaline batteries.
When the battery is charged, the battery status icon in the upper right
corner of the display shows the symbol . When the battery charge
decreases, the white part of the battery icon also decreases. When the
battery symbol is displayed in red, the battery level is low, the battery
must be replaced immediately. If the battery with insufficient charge is
not replaced in time, the measured temperature reading may be
inaccurate.
APO - automatic shutdown.
The device turns off automatically after a period of inactivity, the default
time of the meter is 10 minutes.
56