Troubleshooting - Porter Cable PCC581B Manual De Instrucciones

Problem
• The display is hard to read, the LED light
becomes dim, or the BAT symbol appears
on the LCD screen.
• The LED spot color changes erratically.
• The LED spot immediately turns red or
blue before I have a chance to scan the area.
For assistance with your product, visit our website at www.portercable.com for a list of service
centers, or call the PORTER-CABLE Customer Care Center at (888) 848-5175.
THREE YEAR LIMITED WARRANTY
PORTER-CABLE will repair or replace, without charge, any defects due to faulty
materials or workmanship for three years from the date of purchase for tools (two
years for batteries). This warranty does not cover part failure due to normal wear or
tool abuse. For further detail of warranty coverage and warranty repair information,
visit www.portercable.com or call (888) 848-5175. This warranty does not apply to
accessories or damage caused where repairs have been made or attempted by
others. This warranty gives you specific legal rights and you may have other rights
which vary in certain states or provinces.
In addition to the warranty, PORTER-CABLE tools are covered by our:
1 YEAR FREE SERVICE: PORTER-CABLE will maintain the tool and replace worn
parts caused by normal use, for free, any time during the first year after purchase.
90 DAY MONEY BACK GUARANTEE: If you are not completely satisfied with the
performance of your PORTER-CABLE Power Tool for any reason, you can return it
within 90 days from the date of purchase with a receipt for a full refund – no questions asked.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For
products sold in Latin America, see country specific
warranty information contained in the packaging, call the local company or see website
for warranty information.
To register your tool for warranty service visit our website at www.portercable.com.
WARNING LABEL REPLACEMENT
If your warning labels become illegible or are missing, call (888) 848-5175 for a free
replacement.
All manuals and user guides at all-guides.com

TROUBLESHOOTING

13
Possible Solution
• Replace battery.
• First, try increasing the
threshold level.
• If that doesn't work, turn the
thermometer off. Aim the
thermometer at a different
reference target and turn
the thermometer back on. Keep
the thermometer aimed at the
reference target until the green
spot appears and the LCD
screen shows a reference
temperature.
• You may have moved the
thermometer before it had a
chance to lock in the reference
temperature. Turn the
thermometer off, aim it at the
reference target, then turn it
back on. Do not move the
thermometer until the green
spot appears and the LCD
screen shows a reference
temperature.