Rear View; Visual Status Indicator Definitions; Stardom Itank Series User Manual - Stardom itank i302-1S-SB2 Manual Del Usuario

Front View (All models)
A
B
C
A. Power indicator / Hard drive status indicator
B. Key access opening
C. Removable drive tray
Only one interface connection on the iTANK may be used at once per one computer system.
The secondary FireWire 800 (1394b) connection on the iTANK i302-1S-WBS2 is provided to connect
and extend to another FireWire 800 (1394b) device.
2. Hard Drive Requirements and Precautions
1. Please make sure that the hard drive you will be installing into the enclosure unit is free
from bad blocks or defects to avoid system crashes or data loss.
2. Whenever removing the enclosed drive from the enclosure body or unplugging the
enclosure unit from the computer system, always remember to safely remove the
designated drive from your operating system first.
3. When connected to the computer system, it's prohibited to remove, insert or swap the
hard drive while data transfer is being performed.
4. It is highly recommended for users to back up important data contained within the drive
of the iTANK unit on a regular basis or whenever the user feels necessary to a remote
or a separate storage device. Stardom will not be responsible for any lost of data
caused during the use of the iTANK unit or the recovery of the data lost.

3. Visual Status Indicator Definitions

1. When the front indicator is red, this means the power of the unit is turned on and the
hard drive is idling.
2. When the front indicator blinks between red and purple, this means the drive is being
accessed for operation.

STARDOM iTANK Series User Manual

Rear View

i302-1S-SB2
4
3
i302-1S-WBS2
FW800 FW800 FW400
6 5
1. Power socket
2. Power switch
3. USB2.0 interface connection
4. eSATA interface connection
5. FireWire 400 (1394a) interface connection
6. FireWire 800 (1394b) interface connection
7. Anti-theft cord slot
NOTE :
2 1
7
+5V GND
+12V
E-SATA USB2.0 OFF / ON DC IN
2 1
4 3
3