Fiap BioScreen Active Manual Del Usuario página 8

FIAP BioScreen Active
Malfunctions
Malfunction
Unit cleaning performance not
satisfactory
No water outlet from the pond
inlet
Technische Änderungen vorbehalten. Für Druckfehler übernehmen wir keine Haftung. WEEE-Reg. Nr.: DE78152045
Cause
Unit has been in operation only
for a short time
Inadequate pump capacity
Water extremely soiled
Excessive fish and animal
population
Screen sieve is clogged
Foam filters soiled
Pump power supply not
connected
Pond inlet blocked
FIAP GmbH, Jakob Oswald Str. 16, 92289 Ursensollen
Tel: 09628 9213 0; Fax: 09628 9213 30;
Remedy
- The complete biological
cleaning effect is only achieved
after several weeks
- Use the FIAP Bactobooster
biological starter for a fast
growth of filter bacteria
Readjust the pump capacity
Remove algae and leaves from
the pond, perform a partial
water change
Guide value: approx. 60 cm fish
length in 1 m³ pond water
Clean the FIAP screen sieve
Clean or replace filter foams
Connect pump power supply
Clean pond inlet
www.fiap.com
8