Wash cycles and options
Table of wash cycles
Description of the wash cycle
Synthetics Resistant
Whites
Coloureds
Darks
Steam Refresh
Duvets: for down-stuffed garments.
Bed&Bath for bedlinen and towels.
Rinse
Spin and Pump out
Anti Allergy
Ultradelicates
Wool: for wool, cashmere, etc.
Mix 30': to refresh lightly soiled garments quickly (not suitable for wool, silk and
clothes which require washing by hand).
Cotton Standard 60°C (1): heavily soiled whites and resistant colours.
Cotton Standard 40°C: lightly soiled whites and delicate colours.
Cotton Standard 20°C: lightly soiled whites and delicate colours.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
(*) Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this
value will then be shown on the display.
2) At 60 °C the "Prewash" function cannot be selected.
For all Test Institutes:
1) Test Programmes according to SASO 2692.2007/2693.2007: set wash cycle
Wash options
Steam Hygiene
This option enhances washing performance by generating
steam during the wash cycle that eliminates any bacteria
from fibres while treating them at the same time. Place the
laundry in the drum, choose a compatible programme and
select option "
".
! The steam generated during washing machine operation
may cause the porthole door to become hazy.
! It cannot be used in conjunction with
,
,
(90°).
,
,
Easy Iron
By selecting this option, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine drum will
rotate slowly; the "Easy Iron" and START/PAUSE indicator
lights will flash. To end the cycle press the START/PAUSE
button or the "Easy Iron" button.
! It cannot be used in conjunction with
,
.
All manuals and user guides at all-guides.com
with a temperature of 60°C + antifoam.
By selecting this option, the efficiency of the rinse is
increased and optimal residual detergent removal is
guaranteed. It is particularly useful for skin which is
sensitive to detergents. We recommend this option is used
with a full load of washing, or when a large amount of
detergent is required.
! It cannot be used in conjunction with
,
,
,
,
,
If this function is selected, the pre-wash cycle will run; this
is useful for removing stubborn stains.
N.B.: put the detergent in the relevant compartment.
! It cannot be used in conjunction with
,
,
,
,
,
,
Detergent and additives
Max.
Max.
temp.
speed
(°C)
(rpm)
60°
800
60°
1400
40°
1400
30°
800
-
-
-
-
30°
1200
-
60°
1400
-
1400
-
-
1400
-
60°
1400
-
30°
0
-
40°
800
-
30°
800
-
60°
1400
(2)
(Max. 90°)
40°
1400
-
20°
1400
-
Extra rinse
Prewash
,
(60°),
,
,
,
5
6
6
6
-
-
2
3,5
11
-
11
-
-
11
6
1
2,5
4
11
11
11
,
,
,
,
,
.
,
,
,
,
,
.
9 9
EN