Device Installation - Dahua Technology G26 Guia De Inicio Rapido

Dahua Bullet Wi-Fi Camera Quick Start Guide
Step 6 Select "Yes, go to Wi-Fi Settings" and make sure your smartphone is connected to the
same Wi-Fi, then tap "Next".
Step 7 Fill in the password of your Wi-Fi, then tap "Next".
Step 8 Input your device password, the default password is "admin".
Step 9 Your camera is successfully added. You can set up your time zone and start preview.
Note
If you have more cameras, please follow step 4-9 to add them one by one.

If you want to change the Wi-Fi signal, please reset the camera to factory default and repeat

step 4-9 to add the device

3 Device Installation

Disclaimer
This quick start guide is for reference only. Minor difference might be found in user interface.

All the designs and software here are subject to change without prior written notice.

All trademarks and registered trademarks mentioned are the properties of their respective

owners.
Please visit our website or contact your local service engineer for more information.

If there is any uncertainty or controversy, please refer to our final explanation.
All manuals and user guides at all-guides.com
Figure 3-1 Figure 3-2
3