Getting Started; Installation - Sonic expresslink 3 Instrucciones De Uso

5

GETTING STARTED

Installation

• Install the fitting module you would like to use with EXPRESSlink
your computer. For installation information, please refer to the instal-
lation instructions from the fitting module supplier.
• Attach EXPRESSlink
The flat connector on the USB cable plugs into the computer and the
square connector plugs into the rear of EXPRESSlink
figure below:
• Several seconds after connecting EXPRESSlink
power indicator on the front panel of EXPRESSlink
• Plug the hearing aid programming cables into the connectors on the
front panel of the EXPRESSlink
• Your EXPRESSlink
Note:
The driver software for EXPRESSlink
module. In case the fitting module is uninstalled or updated, the driver
software will remain installed. Updates to the EXPRESSlink
delivered with your fitting software.
To reduce the risk of interference use only the USB cable pro-
vided or a standard USB cable that is less than the maximum
length of 3m.
6
All manuals and user guides at all-guides.com
to the computer using the USB cable provided.
3
EXPRESSlink3_ILLU_Fig4
is now ready to use.
3
to the computer, the
3
.
3
is included in the fitting software
3
on
3
as shown in the
3
turns bright green.
3
driver are
3