blackburn ATOM SL 3.0 Manual Del Usuario página 10

InstAllAtIon
Atom 6.0
The Blackburn Atom 6.0 uses speed and cadence sensors attached to the rear fork.
INSTALLING WIRELESS SPEED SENSORS AND BRACKET
1. Loosely attach the two sensors to rear fork using the zip-ties. Do not fully tighten.
2. Attach the spoke magnet on same side of wheel as sensor.
3. Adjust the positions of sensor and magnet so the magnet passes 1-3 mm from the sensor.
Tighten magnet and zip-ties.
4. Attach the cadence magnet on crank and adjust the positions of cadence sensor, so the
magnet passes 1-3 mm from the sensor. Tighten magnet and zip-ties.
5. Attach the bracket to the handlebars or stem.
BB_Atom_Manual_English.indd 7
All manuals and user guides at all-guides.com
Cadence sensor
ATOM SL
3.0 / 5.0 / 6.0
Sensor
2 mm Max
Speed sensor
1–3 mm
Sensor
Magnet
Back Wheel
12/6/11 4:45 PM