Resetting Lamp Time - Anthem LTX-300 Manual De Instrucciones

5
Replacing the Lamp (Continued)
STANDBY
LENS
INFO LENS.AP
GAMMA
COLOR TINT
BRIGHT CONT
TEST
MENU
CINEMA1
NATURAL STAGE
USER2
USER1
LIGHT
W ARNING
LAMP
ST ANDBY/ON
CAUTION
●
Reset the lamp time only when you
have replaced the lamp.
●
Never reset the service time
the lamp is still in use. Otherwise,
the approximate standard for gauging
replacement time may be inaccurate
and lamp blowout may occur.
48
Downloaded From projector-manual.com Anthem Manuals
All manuals and user guides at all-guides.com
Troubleshooting

Resetting Lamp Time

ON
After replacing the lamp, reset the lamp time.
INPUT
1
ASPECT
C.TEMP
N.R
2
SHARP
HIDE
BACK
BACK BACK
CINEMA2
DYNAMIC
USER3
when
Insert the power plug to the power
outlet
Light on (Red)
Must operate with the remote control
in the standby mode (the projector is
powered, but is not turned on).
●
Press in the order as shown.
●
Press each button within 2-second intervals and press the last
button for 2 seconds or more.
●
[STANDBY/ON] indicator and [LAMP] indicator blink alternately for
3 seconds. After that, the unit switches to standby mode.
HIDE HIDE
Press for 2 seconds or more