Uline H-8278 Instrucciones De Montaje página 3

Figure 6
12
1, 2
PAGE 3 OF 9
ASSEMBLY INSTRUCTIONS CONTINUED
CHAIR ADJUSTMENTS
3
1-800-295-5510
uline.com
6. Once all screws are installed, fully tighten. Insert
plastic caps (12) in holes to cover screws.
(See Figure 6)
1. Seat Height Adjustment – To raise seat height, lift
lever up with little to no weight on the seat. To lower
seat height, lift lever up while sitting.
2. Upright Tilt Lock – To lock chair in an upright position,
push the lever in toward the center of the seat. To
restore tilt, pull lever out. Chair has standard tilt; the
back tilts simultaneously at the same rate as the seat.
3. Tilt Tension – To increase tilt tension, turn knob
clockwise. To decrease tilt tension, turn knob
counterclockwise.
0521 IH-8278