Description Of The Parts - urmet domus 1094/001R Manual De Usuario

USE
The Ref.1094/001R device can only be used as receiver (RX), while the Ref. Sch.1094/001T can only be
used as receiver (TX).
This use allows to connect from 1 to 4 video sources, using a dedicated CAT5 UTP cable.

DESCRIPTION OF THE PARTS

Front panel or Ref. 1094/001R device
ID
1
2
Dip-switch for channel selection. 1, 2, 3 and 4 indicate the channel number.
3 If two or more dip-switches are in "ON" position, the receiver will use those channels in
The dwell time on every channel is 4s or 8s, indicated by dip-switch "T" position.
4
Front panel or Ref. 1094/001T device
ID
1
2
3
4
5
12
All manuals and user guides at all-guides.com
1
2
SMA female antenna connector
If the dip-switch is in "ON" position, the receiver will use that channel.
1
2
SMA female antenna connector
Channel selector . The channel selector is a multifunction switch.
1, 2, 3 and 4 indicate the channel number.
DESCRIPTION
Power supply led
sequence.
ON/OFF switch
Table 1
DESCRIPTION
Power supply led
ON/OFF switch
Gain adjustment
Table 2
4
3
4
5
3
DS1094-000