Toolshop 241-9934 Manual De Seguridad Y Operacion página 11

3. MOUNTING BIT IN CHUCK (See Fig C)
When mounting the drill bit, insert bit between the chuck jaws as far as it will go.
Ensure drill bit is in the center of the chuck jaws. Your drill bit is now locked in the
chuck. The bit can be removed by reversing the above procedure.
WARNING: Before installing accessory, remove plug from power
supply. Do not attempt to tighten drill bits (or any other accessory) by
gripping the front part of the chuck and turning the tool on. Damage to the chuck
and personal injury may result.
C
10
OPERATION
1. OPERATING THE ON/OFF SWITCH (see Fig D)
On/off switch
Depress the switch to start the tool and release it to stop your tool.
Continuous use
Depress on/off switch (1) then lock-on button (2), release on/off switch first and lock-on
button second. Your switch is now locked on for continuous use. To switch off your tool
just depress and release the on/off switch.
D
11