Changing The Oven Light Bulb; Technical Specifications - Proline CN 34 Manual De Instrucciones

Heating element, inner light and turbo function control knob:
Turn the control knob clockwise to select one of the functions listed above. The oven light illuminates on the first setting of the
control knob and remains lit on all settings. Turn the control knob anticlockwise to the "0" position to turn off all settings.
CLEANING:
WARNING: The oven must be switched off and disconnected from the mains supply and be allowed to cool down to room
temperature before cleaning. When cleaning the oven, do not use harsh abrasives, caustic cleaners or sharp objects, use warm
soapy water.
Clean the knobs and control panel using mild cleaners which do not contain abrasives.
Glass door: Clean the glass part of the door with hot water and a soft cloth. Wipe the seals with a soft cloth taking care not to
damage them. Surfaces in contact with food should be cleaned regularly to avoid cross contamination from different types of
food, the use of a commercially available antibacterial spray cleaner is advisable when dealing with surfaces that come into
contact with food. Correct food hygiene practises should always be followed at all times to avoid possibility of food poisoning
/cross contamination.

CHANGING THE OVEN LIGHT BULB:

Unscrew the bulb lens mounted at the back of the oven cavity at the top right.
o
Remove the E14 10W 300 C bulb and fit a replacement, then screw the bulb lens back into place.

TECHNICAL SPECIFICATIONS:

Voltage: 230V Class: I
Power: 1100 W Frequency: 50Hz
Bulb: 10W Type: E14 300
We apology for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of
product improvement and development
©
Kesa Electricals U.K HU1 3AU
All manuals and user guides at all-guides.com
O
C
GB
01 / 11/ 2011