Functional Inspection; Always Read The Manual - DHG BariSling 47001010 Manual Del Usuario

BariSling
BariSling has been designed for lifting persons weighing 200 kg/440lbs or more. It can be used in combination with
mobile or stationary (overhead) lifts, with a four-point slingbar or with a BariTurn. BariSling has six suspension points. It
has two slingbar loops at the back and four below, under the legs, to distribute pressure comfortably and safely.

Functional inspection

Visual and mechanical inspection
Check the condition and function of the sling regularly. Always inspect the product after laundering. Check to ensure that
seams and material are free from damage. Check to ensure that fabric is not worn or faded. Apply load to the device
and check to ensure that clasps, handles, etc. withstand heavy load. If there are signs of wear, the product must be
discarded.

Always read the manual

Always read the manuals for all assistive devices used during a transfer.
Keep the manual where it is accessible to users of the product.
Do not leave the patient unattended during a transfer situation.
To prevent discomfort and the risk of the patient sliding out of the sling, trial fit the sling carefully. First, apply the sling's
back loops to the slingbar, and then apply the leg support loops. Use a slingbar that has been tested.
BariSling product description
1
4
2
3
I F U
BariSling is designed as a full sling without separate leg
1
supports. It has six slingbar loops to distribute pressure
comfortably and safely: two at the back, two below on the
outside of the legs, and two between the thighs.
BariSling consists of:
1. Rear slingbar loops
2. Front slingbar loops
3. Leg harness with slingbar loops
4. Back and seat section
2
3
Instructions for use - English
3