Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions – Micro-Bay
INSTALLATION
Row Mount Fixture
1.
Bend row aligner 90° and separate it from socket track
Flip socket track in place (Figure 1.).
2.
Insert row aligner into channel. Insert wire holder if
running a harness along the row of fixtures. Add screws
on the side of the channel to secure socket tracks in
place (Figure 2.).
3.
Insert harness into wire holder if applicable (Figure 3.).
4.
If using an exterior long connector install as shown to
join channels (Figure 4.).
5.
Use hardware provided in parts bag (Figure 5.).
6.
If using gripple, align the toggle plate with the cable
and push them through the opening in the housing
(Figure 6.).
7 .
When the toggle plate has cleared the opening, pull the
cable or let the weight of the luminaire settle onto the
toggle. To set the height push cable through one groove
of gripple, pass through a suspension point and return
the cable to push through second groove of gripple.
Please see manufacturers' instruction for more details
(Figure 7 .).
Figure 1.
Figure 2.
2
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Installation Instructions – Micro-Bay
0590MBFINS
ADF140684
www.eaton.com
Row Aligner
Wire Holder
Use Pal Nuts on
Outer Ends of
Connector.
Publicidad
