Please read completely through the instructions and verify that all listed parts and hardware are
present before beginning assembly.
A- Chair Backrest (Qty. 2)
(1) M6 x 35 mm Bolt (Qty. 6+1 extra)
(3) Small Lock Washer
(Qty. 14+1 extra)
(7) Hex Nut
(Qty. 8+1 extra)
Tools required: Hex-key wrench, open wrench (provided) and Phillips screwdriver (not provided).
Parts and Hardware List
C- Seat Frame (Qty. 2)
(4) Small Flat Washer
(Qty. 14+1 extra)
(8) 1-1/4" Wood Screw
(Qty. 10+1 extra)
(2) M6 x 80 mm Bolt (Qty. 8+1 extra)
(5) Large Lock Washer
(Qty. 8+1 extra)
Hex-key Wrench
(Qty. 1)
3
B- Front Leg (Qty. 4)
D- Seat Board (Qty. 2)
(6) Large Flat Washer
(Qty. 8+1 extra)
Open Wrench
(Qty. 1)