Operation; Main Display; Dmx Address - Cameo ZENIT W600i Manual Del Usuario

OPERATION

MAIN DISPLAY

The main display shows the currently activated operating mode (in the example: DMX operating
mode with start address 001).
CONFIGURING DMX START ADDRESS (DMX Address)
Press MODE to access the main menu (--- Menu ---). Using the UP and DOWN controls, select
the menu item DMX address (observe arrow) and confirm with ENTER. The display will show a
three-digit number field and you can use the UP and DOWN controls to configure the desired DMX
start address. Confirm the entry with ENTER and press MODE to return to the main display (in the
example, "DMX address 001").
---------------- Menu ----------------

DMX Address

DMX Mode
Stand Alone
Slave
Settings
System Info
CONFIGURING DMX MODE (DMX Mode)
Press MODE to access the main menu (--- Menu ---). Using the UP and DOWN controls, select
the menu item DMX Mode (observe arrow) and confirm with ENTER. In the submenu, you can
now select from the different DMX modes with UP and DOWN. Confirm your selection with ENTER.
Tables with the channel assignments can be found in these instructions under DMX CONTROL.
---------------- Menu ----------------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
DMX Address
001
001
DMX Address
-
001
5xx
------------ DMX MODE ------------
15CH Full Access
10CH Full Access
8CH 8-bit
8CH User-Calibrated
6CH Factory-Calibrated
4CH User-Calibrated
3CH Factory-Calibrated
3CH Color Macro
2CH CCT Factory-Calib
15