teutonia SoftTT Manual De Instrucciones página 6

Soft Carrycot
Base plate external dimension: 735 mm x 282 mm
Suitable mattress dimensions: 30 cm width, 75 cm
length, 3,5 cm thickness
This soft carrycot corresponds to standard
EN 1466:2004-06
The multi-faceted soft carrycot
carrycot around the footrest of the seat unit
3. Fit the left and right waist straps restraints of the
seat unit to the buckle which is sewn into the upper
part of the soft cot
The soft carrycot is fitted with an integrated wind
protector that can be fitted to the hood or to the soft
carrycot when required.
6
With the soft carrycot,
you transform your teuto-
nia stroller into a sporty
pram.
1. Secure the footrest of
the seat unit in the hori-
zontal position
2. Stretch the rubber
strap on the underside of
the foot end of the soft
Conversion to foot bag
3. Remove head piece surround by opening the zip on
the head piece
Make sure that the narrow side of the base plate is
pushed in first.
The soft carrycot can be
used later as a foot muff
after a simple conver-
sion.
1. Open zip on base, re-
move base plate
2. Remove all slot-in
locks of the carrying har-
ness and pull out through
the tunnelling