Resetting The Unit - Sharp CS-4194H Instrucciones De Manejo

WARNING
THE VOLTAGE USED MUST BE THE SAME
AS SPECIFIED ON THIS CALCULATOR.
USING THIS CALCULATOR WITH A VOLTAGE
H I G H E R T H A N T H AT S P E C I F I E D I S
DANGEROUS AND MAY RESULT IN A FIRE
OR OTHER TYPE OF ACCIDENT CAUSING
DAMAGE. SHARP WILL NOT BE HELD
R E S P O N S I B L E F O R A N Y D A M A G E
R E S U L T I N G F R O M U S E O F T H I S
CALCULATOR WITH OTHER THAN THE
SPECIFIED VOLTAGE.

RESETTING THE UNIT

Strong impacts, exposure to electrical fields, or other
unusual conditions may render the unit inoperative,
and pressing the keys will have no effect. If this
occurs, you will have to press the RESET switch on
the bottom of the unit. The RESET switch should
be pressed only when:
• an abnormal event occurs and all keys are
disabled.
• you install or replace the battery.
Downloaded from: http://www.usersmanualguide.com/
Notes:
• Pressing the RESET switch will clear the stored
tax rate and other data stored in the memory.
• Use only a ballpoint pen to press the RESET
switch. Do not use anything breakable or anything
with a sharp tip, such as a needle.
• After pressing the RESET switch, connect the
power supply plug to an outlet. Turn the power
switch "ON" and check that "0." is displayed.
13