Sinbo SSI 2872 ÜTÜ Manual De Instrucciones página 10

Spraying:
Press the spraying button, steam will be sprayed out from the spraying nozzle. At that time, you should
keep enough water in the water tank.
Steam ironing:
1. Use steam ironing, turn the steam control to minimum position and set the temperature control at
the "..."or "max" position.
2. After the indicator goes out, turn the steam control to the suitable position, steam will be sprayed,
ironing can start.
Bursting steam:
Set the temperature control at the "..."or "max" position, then press down the bursting steam button,
the base plate will spray out bursting steam.
Anti-drip:
This iron is equipped with a drip stop function: the iron automatically stops steaming when the
temperature is too low to prevent water from dripping out of the soleplate.
7. CLEAN & MAINTENANCE
1. Before cleaning, please pull out the plug first and then wash the steam iron after cooling.
2. Please scrub the soleplate with soft wet cloth and keep it level and smooth avoiding mental-friction.
3. Scrub incrustation off the spraying nozzle with toothpick.
4. Wash the inside of the water tank frequently. First fill water, then sway it and finally pour out water
through the water filling mouth.
5. Don't use strong acid or alkali so as not to damage the frame and produce phenomenon of changing
color.
6. Pour out water in the water tank completely after using every time, and store it upright.
SIMPLE MAINTENANCE METHODS:
After approaches above, the steam iron is still not at work, please send it to the distributor for examining
and repairing.
NOTE : THE SOLEPLATE OF STEAM IRON MUST TO BE DRIED AFTER USE
- 9 -