Phonic i7600 Manual Del Usuario página 10

Channel Link
when this function is set to On, all settings of channel
1 are copied to channel 2; and all subsequent
adjustments will be simultaneously applied to both
channels. when Channel Link is Off, you can
adjust each channel separately; the location of the
cursor determines which channel is to be affected.
when the cursor is in the left pane, the adjustment
is made to channel 1; and when it is in the right
pane, channel 2 is affected.
Gain
this function lets you increase or decrease the gain
level of the channel output. the range of control is
from negative infinity to +6 dB. When Channel Link
is set to Off, you can adjust the gain level for each
channel separately.
Low-Pass filter (LPf)
A low-pass filter lets you "cut out" the unwanted high
frequencies. You may set the threshold frequency
anywhere between 1 khz to 20 khz in 1/6-octave
intervals. Alternatively, you may remove the filter
by setting it to Off. this function is channel
dependent.
High-Pass filter (HPf)
a high-pass filter lets you "cut out" the unwanted low
frequencies. You may set the threshold frequency
anywhere between 20 hz to 1 khz in 1/6-octave
intervals. Alternatively, you may remove the filter
by setting it to Off. this function is channel
dependent.
recall
this function lets you recall a previously stored
program. this is an easy way to set up your Eq; it is
especially useful during live events that often call for
quick changes to the Eq settings in etween songs.
You may recall any of the 60 stored programs (0
factory-set programs, from p1 to p0; and 0 user-
de? ned programs, from u1 to u0). See appendix
a for all factory programs. See also appendix B for
blank diagrams where you can record your favorite
settings.
caution: when you recall a program, the current
Eq settings of both channels will be lost, regardless
of the channel-link status. if you plan to use the
current setting in the future, consider storing it
before performing a recall.
6
Store
this function lets you store your favorite settings.
You may store up to 0 programs, from u1 to u0.
information stored in a program includes all following
values for both channels: the channel-link status,
gain levels, low-pass-? lter frequencies, high-pass-
? lter frequencies, and boost/cut levels of all bands.
appendix B provides 0 blank diagrams for you to
record your stored programs.
key Lock
the lock function can be activated by simply
pressing the graphic and function Edit controls
simultaneously. Enabling locking means that you are
then unable to change any settings of the i7600 until
you have unlocked it once more. this helps prevents
accidental alteration of settings while the device is
in use. to turn the lock off, once again press the
graphic and function Edit controls simultaneously.
Auto Store
if the controls on the i7600 remain unused for
more than 10 seconds, your current settings will
automatically be saved and will be stored, even
after the power is turned off. this ensures that your
settings are never lost in unexpected power outages
and that you get the settings you desire most on
start up.
i7600