Bebecar Style AT Manual De Instrucciones página 9

GB
IMPORTANT READ CAREFULLY & KEEP
WARNING YOUR CHILDS SAFETY IS YOUR RESPONSIBILITY
WARNING: This pushchair has been designed to be operated as shown in the instructions supplied. Not
to do so may cause damage and render your guarantee void.
1 - TO UNFOLD: Lift handlebar and pushchair will assume fully open position.
Ensure primary safety locks (A) and secondary lock (B) will correctly engage.
2 - TO ATTACH WHEEL GUARDS:
N.B. NOT INCLUDED FOR THE UK, BUT ARE AVAILABLE AS AN OPTIONAL EXTRA.
Place wheel guards on wheel axle with clip facing inwards.
Press until it clicks and locks onto frame tubing. The longer sides (L) should face each other while
the shorter sides (S) should face away from each other.
N.B. Always ensure that the chassis is folded carefully when the wheel guards are fitted. The handle
should not be forced into the fully closed position; this may cause the wheel guards to become bent.
We recommend that the wheel guards be removed when the chassis is not used regularly.
3 - REMOVABLE WHEELS: To fit and remove the wheels simply press the metal clip near the hub.
4 - BRAKE OPERATION: To apply brake, press down on the bar.
5 - To release brake, pull up the bar.
6 - ADJUSTABLE HANDLE HEIGHT:
Press the two buttons simultaneously and raise or lower the handle bar as required.
7 - TO FIT CARRYCOT / SEAT:
Seat may be forward or rear facing. Place seat runners in attachment points (A) on both sides.
Lower into position (B) and lock will automatically engage.
Ensure seat frame runners are secure at all 4 attachment points (A & B on both sides).
TO REMOVE CARRYCOT / SEAT:
Push in red button and turn knob while lifting seat / carrycot away from frame.
8 - TO FOLD:
Firstly press the red button and then simultaneously, turn the handle collar in the direction of the
"FOLD" and the chair will begin to close.
When opening or folding a pushchair which has an adjustable handle, ensure that the handle is in
one of the middle positions.
9 - Then release secondary safety lock (B) by pressing down and lift handlebar.
10 - Push handle forward until chair is fully folded.
11 - TO LOCK THE CHASSIS IN FOLDED POSITION:
Push the handle until it rest between points A & B on the front suspension.
12 - SHOPPING TRAY: Maximum weight load is 5kg evenly distributed. Do not over load.
The carrycot can be transported in the rear seat of the car, when using the Kit SN 5259 according to the
requirements of ECE-R44-04.
GB
FOR FUTURE REFERENCE