Kalorik USK WCL 1 Manual Del Usuario página 5

All manuals and user guides at all-guides.com
The unit's cooling system operates efficiently with an ambient
•
temperature of less than 21°C.
Do not locate the wine bar in direct sunlight. Do not place unit
•
next to a major appliance that emits large amounts of heat, such
as a dishwasher, microwave, oven, barbecue, etc.
ALWAYS REMOVE ALL BOTTLES BEFORE MOVING THE WINE BAR
•
Installing / Replacing Batteries in your Wine Bar's
Wireless Temperature Probes
The Wine Bar's Wireless Temperature Sensors already come with
batteries installed at the factory. Should the Sensor Unit batteries ever
need to be replaced:
1. Open the Sensor Unit by removing the battery lid with a small flat
head screwdriver.
2. Remove the exhausted battery and replace it with a lithium
button cell "CR2032"
3. When inserting the new battery make sure that the positive "+"
terminal of the battery is upwards.
4. Replace the battery lid.
BE CAREFUL WHEN INSTALLING BATTERIES IN THE WIRELESS
TEMPERATURE SENSOR OF WINE BAR. INSTALLING THE INCORRECT
BATTERIES OR REVERSING THE POLARITIES COULD CAUSE PERMANENT
DAMAGES TO THE PRODUCT.
Operating instructions
Easy to Use Preset Mode (Using the Wine Bar with the Temperature
Probes)
1. Turn on the Wine Bar by pressing the "POWER" button on the
Main Unit
2. For each zone (left & right) set the wine setting according to the
wine type you wish to chill by pressing the "WINE TYPE" button.
Keep pressing the wine type button until the correct setting
appears on the LCD & screen.
3. Once you have selected the appropriate temperature preset
turn on the correct temperature probe and insert it in your bottle
to activate that particular zone (Left or Right). You will notice the