Functions/Operation - WENKO IMPERIAL Manual Del Usuario

Functions/Operation

Switching on and off
• Press the
• Press the
Select mode
• Briefly press the
The time is displayed
• Briefly press the
• The device is in USB mode�
• Briefly press the
The order of modes is: Switch on – clock – USB – Bluetooth – FM radio ...
Coupling to a Bluetooth device
There are 2 ways of coupling the device to a Bluetooth device. If the device is in
Bluetooth mode for the first time, the blue symbol in the LED display flashes and
indicates that it is ready for coupling.
The blue symbol
• Keep the
• Wait until WENKO MUSICMIRROR is displayed on the device.
• Connect the Bluetooth device to the mirror�
The blue lamp immediately stops flashing and lights up constantly to indicate that
coupling was successful. You can now use your music mirror.
Instructions for operation
Activate the Bluetooth function on your device and follow the coupling instructions.
Bluetooth devices have a maximum range of 10 m. For the optimum quality of the calls
hands-free facility, you should keep a maximum distance of 1 m.
When you switch your mirror on, it will attempt to automatically connect to the last
connected device�
If more than one device has been successfully coupled, it will automatically connect to
the last connected device�
If more than 8 devices are coupled to the mirror, the oldest device in the memory will
be automatically deleted.
For calls in another status (MP3, FM) the device automatically changes over to
Bluetooth mode within 2 seconds�
When you hang up or do not accept a call, the device automatically changes back into
the previous mode within 2 seconds�
Imperial_Buch_080515.indb 25
All manuals and user guides at all-guides.com
button to switch the device on and call clock mode�
button for switching off until "OFF" appears on the display.
button to switch the device on�
button again to change the mode�
button again�
in the LED display is switched off in Bluetooth status.
button pressed for 2 seconds until you hear a beep
25
03.07.15 08:28