Kohler K-2443 Guia De Instalacion página 3

Outlet Hose
Supply Hoses
(3)
Shoulder
Screw
Spring
1. Install the Handle
Install the Bracket (1)
Open the cabinet/shelf access panel.
Attach the bracket around the valve opening with four hexhead
screws, as shown. Do not fully tighten the hexhead screws at this
time.
Insert the Handle Assembly (2)
Ensure the gasket is set in the groove of the handle assembly.
From the front of the cabinet/shelf, feed the hoses of the handle
assembly through the valve opening and bracket.
Position the handle assembly against the valve opening with the
outlet hose positioned above the supply hoses.
Secure the Handle Assembly (3)
Slide a spring over each of the three shoulder screws.
NOTE: If necessary, slightly adjust the bracket to enable the
shoulder screws to pass through the mounting holes on the bracket
and to properly seat the bracket on the valve body.
Kohler Co.
(1)
Gasket
Outlet
Groove
Hose
3
Hexhead
Screws
Bracket
Valve
Opening
(2)
Handle
Assembly
1070285-2-B