Assembly - Greencut GE180XE Manual De Instrucciones

58

ASSEMBLY

1. Remove the machine from the box and place it on a high and strong surface.
2. Remove the nuts (A), the screws (B) and the tube (C).
3. Loosen the screw (D) and drop the lower part of the discharge chute (E).
1
4. Align the front support (F) with the holes and insert the hardware and tube.
5. Attach the rear axle support (G) and wheels (H).
6. Remove the fixing screws (I), fit the rear axle support (G), making the holes coincide, insert the screws again
(I) and adjust them securely (from the outside to the inside).
4
C
A+B
F
2
C
A+B
5
G
H
3
E
6
G
D
I