Media Port - Steren CCTV-970 Guía Rápida

● STATIC
PORT: For video transmission via internet.
WEB PORT: setup the HTTP communication port.
IP ADDRESS: setup the IP address, press [Enter] or number keys to change the value.
NETMASK: press [Enter] or number keys to change the value.
GATEWAY: press [Enter] or number keys to change the value.
12 12
All manuals and user guides at all-guides.com
● DHCP
PORT: communication port between PC and
DVR, it is recommend to use the default port.
WEB PORT: setup the port of IE browser via
HTTP.
Remark: when you setup the net mode as
DHCP, the router will arrange a dynamic IP for
DVR.
● PPPOE
MEDIA PORT: communication port between PC
and DVR, it is recommend to use the default
port.
WEB PORT: setup the HTTP communication
port.
PPPOE username and password: fi ll the user-
name and password given by your internet ser-
vice provider, apply it and reboot the system.
After rebooting, the device will save it and set
the PPPOE as default network type. If succeed,
the IP address will be automatically confi gured
as dynamic WAN IP.