Tools; Technical Data - Hilti TE 30-ATC Manual De Instrucciones

Never operate other power tools or appliances from the generator or transformer at the same time. Switching other
power tools or appliances on and off may cause undervoltage and / or overvoltage peaks, resulting in damage to the
power tool.

3 Tools

Tools and accessories
Designation
Chuck
Chuck
Quick-release chuck for wood and
metal drill bits
Anchor-setting tools
Hammer drill bits
TE‑C percussion core bits
TE‑C percussion core bits
TE‑C forming and installation drill
bits
Wood drill bits
Metal drill bits
Pointed chisels
Flat chisel
Shaped chisels
Dust removal system

4 Technical data

Right of technical changes reserved.
NOTE
The power tool is available in various voltage ratings. Please refer to the power tool's type identification plate for
details of its rated voltage and rated input power.
Power tool
Rated power input
Rated current input
Mains frequency
Weight in accordance with EPTA procedure 01/2003
Dimensions (L x W x H)
Drilling speed without hammering
Hammer drilling speed
Single impact energy in accordance with EPTA proced-
ure 05/2009
Protection class as per EN
All manuals and user guides at all-guides.com
Short designation
TE DRS‑S
Description
TE‑C (SDS Plus)
TE‑T (SDS Top)
For smooth or hex. shank
TE‑C or TE‑T connection end
∅ 6...28 mm
∅ 25...68 mm
∅ 25...68 mm
∅ 10...35 mm
∅ 3...25 mm
∅ 3...13 mm
TE‑C or TE‑T connection end
TE‑C or TE‑T connection end
TE‑C or TE‑T connection end
TE 30‑ATC
1,010 W
Rated voltage 220...240 V: 7.6 A
Rated voltage 220 V: 7.9 A
Rated voltage 230 V: 7.6 A
Rated voltage 240 V: 7.3 A
50...60 Hz
4.0 kg
371 mm x 109 mm x 218 mm
853/min
853/min
3.4 J
Protection class II (double insulated) as per
EN 60745‑1
en
17