TACKLIFE MTS01A Manual Del Usuario página 3

All manuals and user guides at all-guides.com
NOTE TO USER
This instruction manual is meant to serve as a guide only. Specifications and references
are subject to change without prior notice.
GENERAL & SPECIFICSAFETY INSTRUCTIONS
1. KNOW YOUR TOOL
Read and understand the owners manual and labels affixed to the tool. Learn its application and
limitations as well as its specific potential hazards.
2. KEEP GUARDS IN PLACE.
Keep in good working order, properly adjusted and aligned.
3. REMOVE ADJUSTING KEYS AND WRENCHES
Form habit of checking to see that keys and adjusting wrenches are removed from tool before
turning it on.
4. KEEP WORK AREA CLEAN.
Cluttered areas and benches invite accidents. Make sure the floor is clean and not slippery due to
wax and sawdust build-up.
5. AVOID DANGEROUS ENVIRONMENT.
Don't use power tools in damp or wet locations or expose them to rain. Keep work area well lit and
provide adequate surrounding work space.
6. KEEP CHILDREN AWAY.
All visitors should be kept a safe distance from work area.
7. MAKE WORKSHOP CHILD-PROOF.
Make workshop child-proof with padlocks, master switches or by removing starter keys.
8. USE PROPER SPEED.
A tool will do a better and safer job when operated at the proper speed.
9. USE RIGHT TOOL.
Don't force the tool or the attachment to do a job for which it was not designed.
10. WEAR PROPER APPAREL.
Do not wear loose clothing, gloves, neckties or jewelry (rings, watch) because they could get
caught in moving parts. Non-slip footwear is recommended. Wear protective hair covering to
contain long hair. Roll up long sleeves above the elbows.
11. ALWAYS WEAR SAFETY GLASSES.
Always wear safety glasses (ANSI Z87.1). Everyday eyeglasses only have impact resistant
lenses, there are NOT safety glasses. Also use a face or dust mask if operation is dusty.
12. DON'T OVERREACH.
Keep proper footing and balance at all times.
13. MAINTAIN TOOL WITH CARE.
Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and
changing accessories.
14. DISCONNECT TOOLS.
Before servicing, when changing accessories or attachments.
15. AVOID ACCIDENTAL STARTING.
Make sure the switch is in the "OFF" position before plugging in.
16. USE RECOMMENDED ACCESSORIES.
Consult the manual for recommended accessories. Follow the instructions that accompany the
accessories.The use of improper accessories may cause hazards.
- 2 -
EN