BEA DPS 1277 Manual De Instrucciones página 4

INSTALACIÓN (cont.)
DPS 1084 DPS 1084
1. Determine la ubicación de la montura en el marco de la puerta.
2. Marque y perfore dos orificios para el montaje del interruptor.
3. Monte el interruptor al marco con los tornillos.
4. Alinee el imán en la puerta con el interruptor.
5. Marque y perfore dos orificios para el montaje del imán.
6. Monte el imán con los tornillos.
7. Cablee el interruptor según sea necesario para la aplicación.
BEA, the sensor manufacturer, cannot be held responsible for incorrect installations or inappropriate adjustments of the sensor/device; therefore, BEA
does not guarantee any use of the sensor outside of its intended purpose.
BEA strongly recommends that installation and service technicians be AAADM-certifi ed for pedestrian doors, IDA-certifi ed for doors/gates, and factory-
trained for the type of door/gate system.
Installers and service personnel are responsible for executing a risk assessment following each installation/service performed, ensuring that the sensor
system installation is compliant with local, national, and international regulations, codes, and standards.
Once installation or service work is complete, a safety inspection of the door/gate shall be performed per the door/gate manufacturer recommendations
and/or per AAADM/ANSI/DASMA guidelines (where applicable) for best industry practices. Safety inspections must be performed during each service
call – examples of these safety inspections can be found on an AAADM safety information label (e.g. ANSI/DASMA 102, ANSI/DASMA 107, UL 325).
Verify that all appropriate industry signage and warning labels are in place.
General Tech Questions: Tech_Services@beainc.com | Tech Docs: www.BEAinc.com
Page 4 of 4 Page 4 of 4
0.41"
1.04cm
0.28"
0.56" 0.71cm
1.42cm
0.22"
0.56cm
0.25"
0.50"
0.64cm
1.27cm
BEA INSTALLATION/SERVICE COMPLIANCE EXPECTATIONS
Tech Support: 1-800-407-4545 | Customer Service: 1-800-523-2462
1.73"
4.39cm
sensing face
2.11"
5.36cm
0.41"
1.04cm
1.72"
4.37cm
sensing face
2.11"
5.36cm
0.56"
0.22"
1.42cm
0.56cm
75.5944.01 DOOR POSITION SWITCHES 20180406 75.5944.01 DOOR POSITION SWITCHES 20180406
ACCIONADOR
0.13"
0.33cm
0.50"
1.27cm
INTERRUPTOR
0.13"
0.33cm
0.77"
1.96cm