Before Operation; Setting The Clock; Kitchen Timer Function - Sharp R-360 Manual De Instrucciones

Tabla de contenido

Idiomas disponibles

Plug in the oven. The oven display will display: "1:00" and "

once.

This model has a clock function and the oven uses less than 1.0W in stand by mode.

To set the clock, see below.

Your oven has a digital clock feature, you can choose to set the clock time in 24 or 12 hour

cycle in stand by mode.

1. Press the KITCHEN TIMER/SET CLOCK key once for 3 seconds, " Hr 24" will display and the

clock indicator "

2. Press the KITCHEN TIMER/SET CLOCK key twice, ''Hr 12" will display and the clock indi-

cator "

"will illuminate.

3. After choosing the hour cycle, press number keys '' 10Min'' , ''1Min'' ,''10Sec'' to input the

clock time .

4. Press the KITCHEN TIMER/SET CLOCK key once to start the clock. The icon '':'' of thedigi-

tal time will flash on the display and the clock indicator "

NOTES:

• In the process of clock setting, if the STOP/CLEAR keyis pressed, the oven will go back to

the former setting.

• If the electrical power supply to your microwave oven is interrupted, the display will in-

termittently show "1:00" after the power is reinstated. If this occurs during cooking, the

programme will be erased.

You can use the kitchen timer function, in instances where microwave cooking is not in-

volved for example to time boiled eggs cooked on conventional hob or to monitor the

standing time for cooked/defrosted food.

Example:

To set the timer for 5 minutes.

1. P ress KITCH-

EN TIMER/

SET CLOCK

keyonce,the

icon '':'' will flash

and the clock

indicator "

"will

illuminate.

When the timer arrives at 0:00, an audible signal will sound once, and the LCD will display

the time of day.

You can enter any time up to 99 minutes 50 seconds. In kitchen timer state, the kitchen time

will be diaplayed for 5 seconds.

"will illuminate.

KITCHEN TIMER FUNCTION

2. Press number

keys ''10Min'' ,

''1Min'' , ''10Sec'' to

input time .

GB-16