Troubleshooting - Eldom Vera SK9S Manual De Instrucciones

3. Remove the juice collector together with the filter
4. Clean these parts with a cleaning brush in warm water with some washing-up liquid and
rinse them under the tap.
5. Clean the motor unit with a damp cloth.
Never immerse the motor unit in water nor rinse it under the tap.

TROUBLESHOOTING

Ten rozdział podsumowuje najczęściej spotykane problemy, które można napotkać w trakcie
użytkowania urządzenia. Prosimy zapoznać się z nimi. Jeśli rozwiązanie problemu na ich
podstawie nie jest możliwe – należy skontaktować się z serwisem.
PROBLEM
The appliance does not work
The motor unit gives off an unpleas-
ant smell the first few times the
appliance is used.
The appliance makes a lot of noise,
gives off an unpleasant smell, is too
hot to touch, gives of smoke etc.
The filter is blocked.
The filter touches the feeding tube or
vibrates strongly during processing.
ENVIRONMENT PROTECTION
- the device is made of materials that can be reused or recycled
- it should be handed to the special collection point, that deals with collection and recycling of
electronic and electric devices,
WARRANTY
- only intended for household use,
- it cannot be used for commercial purposes
- the warranty loses validity in case of inappropriate use,
11 EN
SOLUTION
The appliance is equipped with a safety system. It won't work if
the parts have not been mounted properly. Check whether the
parts have been assembled in the right way, but switch off the
appliance before you do so.
This is not unusual.If the appliance continues to give off this smell
after a few times, check the quantities you are processing and the
processing time.
Switch the appliance off and unplug it.
Switch the appliance off, clean the feeding tube and the filter and
process a smaller quantity.
Switch the appliance off and unplug it. Check if the filter has been
properly placed in the juice collector. The ribs in the bottom of
the filter should fit properly onto the driving shaft. Check if the
filter is damaged. Cracks, crazes, a loose grating disc or any other
irregularity may cause malfunction.