Operation; Before Use; Checklist - Signature Kitchen Suite SKSUW2401P Manual Del Propietário

Ocultar thumbs Ver también para SKSUW2401P:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

us_main.book.book Page 7 Friday, May 28, 2021 8:34 AM

OPERATION

Before Use

Checklist

Clean the refrigerator.
Clean the refrigerator thoroughly and wipe off all dust that accumulated
during shipping.
CAUTION
• Do not scratch the refrigerator with a sharp object or use a detergent that
contains alcohol, a flammable liquid or an abrasive when removing any
tape or adhesive from the refrigerator. Remove adhesive residue by wiping
it off with your thumb or dish detergent.
• Do not peel off the model or serial number label or the technical
information on the rear surface of the refrigerator.
Open refrigerator door to ventilate the interior.
The inside of the refrigerator may smell like plastic at first. Remove any
adhesive tape from inside the refrigerator and open the refrigerator door for
ventilation.
Connect the power supply.
Check if the power supply is connected before use.
Wait for the refrigerator to cool.
Allow the refrigerator to run for at least two to three hours before storing
wine bottles in it.
The refrigerator makes a loud noise after initial operation.
This is normal. The volume will decrease as the temperature decreases.
OPERATION
7

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido