Bluetooth Setup; Usb Playback; Usb Recording; Audio Interface - Phonic CELEUS TUBE Manual Del Usuario

BLUETOOTH SETUP

1. Set the "Wireless Pairing" switch to the ON position and
push the BT button on channel 2.
2. Enter your smartphone or tablet's Bluetooth setup
options to find the "Phonic.BT" Bluetooth device.
3. If requested, the password for the CELEUS TUBE's
Bluetooth function is 0000. Many modern smartphones
will enter this as the default password.
4. Audio signals received through the Bluetooth interface
will be routed to channel 2 on the mixer.
5. To reset the connection, turn your smartphone or tablet's
Bluetooth connection off and then on again.
6. When using cell phones and tablets, it may be an idea to
turn "Airplane Mode" or "Flight Mode" on to stop phone
calls or push notifications from interrupting your audio.
Note: Not all modern Bluetooth-enabled devices allow for use of external
audio playback. In the case of laptops in particular, Bluetooth may be used
for data transmission only - depending on the model. This is a limitation of
these devices and you will not be able to use the CELEUS TUBE's Bluetooth
function with these devices.

USB PLAYBACK

1. Power on the device.
2. Insert an appropriately formatted (FAT32) USB flash
drive.
3. Press the PLAY button to play the current track, or
the << and >> buttons to skip forward and backwards
between tracks.
4. The CELEUS TUBE can playback MP3 and WMA files.
5. Use the TAPE IN/USB PLAY level control to adjust the
USB player's volume. Ensure the USB PLAYER button
is engaged.
6. Press the STOP/MENU button to access the File
Browser (Folders) and Repeat Mode functions.
Folders – Freely navigate songs in each folder on USB
flash disc using the << and >> buttons. Press PLAY button
to select, press MENU button to go back.
Repeat Mode – There 4 repeat modes available.
No Repeat – Play each file in the current folder or root
once.
Repeat One – Continuously repeat selected song.
Repeat Folder – Continuously repeat all the song in the
current folder or root directory.
Random – Enables random playback of files in current
folder or root.

USB RECORDING

1. Insert a FAT-32 formatted USB flash drive to the USB
player.
2. In the main menu, select "Recordings" and press the
PLAY button to enter the recording function.
3. Here you have three options: 'Start voice recording,'
'Recordings library,' and 'Storage'. To select the recording
destination, enter the 'Storage' menu and choose either the
USB flash drive or the internal storage (70MB available).
4. Select "Start voice recording" to begin recording
immediately. The unit will save an audio file to the
selected storage destination.
5. Push the PLAY button to pause recording. Pushing
the PLAY button again will resume recording from the
position at which it was paused.
6. Press the STOP/MENU button at any time to stop the
recording. The device will then ask if you wish to save
your recording. Select "Yes" or "No".
7. Press the STOP/MENU button to exit.
Note: As the quality of the flash drive can affect recording performance,
Phonic recommends using Sandisk brand drives to help ensure stable
recording performance.
2
All manuals and user guides at all-guides.com
USB MODULE STORAGE
The CELEUS USB player module features approximately
70MB of onboard storage to use for playback. That may
sound small but that could mean up to 60 minutes of music
at 128 Kbps, or a few hours of speech at 40 Kbps.
To upload files to the onboard storage, you will need a
USB-A to USB-A cable. Connect the USB connector on
the face of the CELEUS to your computer and it will be
recognized as a USB storage device. Simply copy your
files to the CELEUS TUBE.
Files on onboard storage will only be available when a USB
flash drive is not connected.

AUDIO INTERFACE

By simply connecting the USB cable provided along with
your CELEUS to the device and your personal computer
or laptop, you are able to send DVD quality (16-bit stereo,
with a 48 kHz sampling rate) signal to and from your mixer.
By doing this, you are actually turning your CELEUS
TUBE into a highly useful plug'n'play soundcard for your
computer.
The USB sends an audio stream of the Main Left and Right
(record out) signal of your mixer to the computer. You can
use almost any dedicated Digital Audio Workstation (DAW)
software to record the signal from the CELEUS mixer. You
can also set the mixer as your default audio device.
The USB interface also returns a stereo audio signal from
your computer back to channel 3 of the CELEUS. Ensure
the USB AUDIO button is engaged.
Windows
1. Turn on both the CELEUS and the computer.
2. Connect the CELEUS mixer to the computer via the
3. Let Windows find the device and install an appropriate
4. Enter the Control Panel and select Sounds and Audio
5. When here, go to the Audio tab and select the "USB
6. Depending whether you have Windows XP, Vista, 7, 8 or
7. If you don't want to use the CELEUS as your default
8. Be sure to set your minimum buffer settings to 64
Mac
1. Turn both the CELEUS and the computer on.
2. Connect the CELEUS mixer to the computer via the
3. Enter the AUDIO MIDI SETUP menu.
4. Select the "USB Audio Codec" as your input and output
5. The CELEUS is now your default audio device.
6. Alternatively, enter your DAW software (or other relevant
7. Be sure to set your minimum buffer settings to 64
provided USB cable.
driver.
Devices.
Audio Codec" as your default sound recording and
playback device.
10, this may differ slightly, but the setting can always be
found within the Control Panel's audio menu.
audio device, you can simply enter your DAW or other
audio program and select it as your default device in the
program only.
samples as to avoid clicks and pops.
provided USB cable.
device.
audio program) and select the "USB Audio Codec" in the
device preferences.
samples as to avoid clicks and pops.
CELEUS TUBE