— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Stitch width
Lower the presser foot lever.
0
• For details on changing the stitch width, refer
to "Stitch width dial" on page 14.
Sew at a slow speed holding the fabric
a
with your hands, so that the needle
slightly catches the fold of the hem.
Remove the basting stitching and turn the
b
fabric right side up.
1
1 Wrong side of fabric
Shell tuck stitching
Stitch Name
Shell Tuck
Stitch
The Shell Tuck Stitch can be used to sew a picot (lace-
like) edge on lightweight fabric.
Adjust the thread tension so that it is
1
tighter than normal.
Place the fabric under the presser foot so
2
that it will be sewn along the bias, with
the straight stitches sewn on the seamline
and the zigzag stitches sewn slightly over
the folded edge.
All manuals and user guides at all-guides.com
2
2 Right side of fabric
Stitch
Stitch
Pattern
Length
Width
[mm (inch)]
[mm (inch)]
5
F-3
3-6.5
(1/64-1/8)
(1/8-1/4)
Sew at a slow speed.
3
1 Straight stitches
2 Zigzag stitches
Elastic stitching
Stitch Name
Pattern
6
Elastic Stitch
You can use the Elastic Stitch for mending, sewing
elastic or joining fabric. Each is explained below.
■ Mending
Place the reinforcement fabric under the
1
area you want to mend.
• Use the basting pins to hold the
reinforcement fabric.
Following the line of the tear, sew using
2
the Elastic Stitch as shown.
■ Sewing elastic
Pin the elastic tape to the wrong side of
1
the fabric.
As you sew, stretch the elastic in front of
2
and behind the presser foot.
2
1
Stitch
Stitch
Length
Width
[mm (inch)]
[mm (inch)]
F-2.5
3-6.5
(1/64-3/32)
(1/8-1/4)
34
3