User alert functions
User alert functions become active in the following situations.
Situation
Details
• The set time has been reached in Drink
Mode has ended.
Cool Mode.
• The fridge and/or freezer door has been
Door ajar.
left ajar for more than 2 minutes.
Making ice cubes
Open the freezer, pull out the upper drawer and take out the ice tray
on the ceiling. Fill water in the ice tray to the water level line and then
place back the ice tray.
When ice cubes are ready, pull out the upper drawer and take out the
ice tray. Slightly twist the ice tray by holding its two sides, the ice cubes
will drop from the ice tray. Then, put the ice tray back into its place.
Removing and attaching shelves
Fridge
Glass shelves
Lift the inner side of the shelf slightly and pull it out.
When removing the glass shelves, before pulling them out, remove
the door and bottle shelves first if they are in the way.
When you remove the glass tray, open the door until it touches the
stopper.
Crispers
Pull the crispers towards you and pull it out.
Door shelves and bottle shelves
Lift it slightly and then remove it.
Chill compartment drawer
Pull out the drawer, hold the front part and lift it up diagonally, and
remove it.
Pull the drawer towards you, lift the front
Freezer
slightly, and pull it out.
Having removed the drawer, you can store
food in the empty compartment.
14 14
Alarm
How to stop the alarm
Beeps continuously
Press
Beeps every 5 seconds
Close the door(s).
Water level line
.