3B P50 Manual Del Usuario página 3

English
How to change the tubing system:
• Unfasten the Velcro strips, remove the tubing system, fit the new system into the provided grooves and
refasten it using the Velcro strips.
How to attach the skin:
• The new skin can be easily pulled over the arm core by putting some talcum powder into the skin and
distributing the powder by moving the skin back and forth. Pull the skin over the arm core, put the tube
back through the location hole and the cover plates. The rim of the skin should be squeezed between
the two cover plates. Fasten the ring screw and replace the sealing caps onto the tubes.
Please note the following:
• The skin and the tubing system of the injection arm are subject to wear and tear caused by usage.
We supply the skin or the tubing system as a replacement part.
• As the injection arm is an anatomical model, several – non-puncturable – veins are portrayed in the
skin in addition to the puncturable veins.
• The artificial blood may cause permanent stains. Please handle with care.
• Indwelling vein cannulas may damage the material of the skin and of the tubing system. Please use
only injection cannulas of the recommended size (20 or 21 gauge).
Product numbers for replacement parts
XP102 Infusion bottle with suspension net
XP104 3 complete tubing systems
XP106 Replacement skin with hand core
XP107 Arm core (without hand)
XP108 Artificial blood
In case of complaints, please indicate the serial number imprinted on the core of the injection arm under
the white cover plates.
Name
Injection arm
®