Jameson STUBBY LIGHT Guia De Inicio Rapido

Since 1956
General
All batteries lose power while on the shelf. The first use of
light may not be as bright or operating time shorter than
a fully charged battery. If light does not work on first use,
charge battery. Also, check fuse in plug (twist and remove
the silver button - fuse is inside), before contacting Jame-
son. When battery has discharged to a voltage that will
not operate the light, the provided charger will recharge
battery in 7-10 hours (overnight).
Do not disassemble battery pack.
Do not short or cause any material to bridge the battery terminals. This could cause the terminals or connecting wires to
melt and cause burns.
Disposal - Do not incinerate.
Keep Battery Clean - Wipe battery with dry cloth or, if necessary, use water dampened cloth. Never use oil, gasoline,
thinner or other petrochemicals.
Do Not Use In Totally Sealed Case or Container—It is recommended that the battery pack cover be left open during
charging process. This ensures any gases generated will be released to the outside atmosphere.
Jameson products carry a warranty against any defect in material and workmanship for a period of one year from date of shipment unless
failure is due to misuse or improper application. Jameson shall in no event be responsible or liable for modifications, alterations, misapplica-
tions or repairs made to its products by purchaser or others. This warranty is limited to repair or replacement of the product and does not
include reimbursement for shipping or other expenses incurred. Jameson disclaims any other express or implied warranty.
INSTRUCTIONS
If battery is accidentally broken and electrolyte
(sulfuric acid) leaks out:
If electrolyte contacts skin, immediately flush with water
and consult doctor. If electrolyte gets on hands, keep
away from eyes. Wipe up with cloth, neutralize acid with
alkaline substance such as ammonia or baking powder.
After neutralizing, rinse affected area with water.
Care and Handling of Battery Pack
WWW.JAMESONLLC.COM
Part Number
31-131012VCC
31-BP-SC
31-1310-BP-SC
Charging Battery
1. Disconnect light from battery pack.
2. Plug AC charger into wall outlet. Do not remove battery
from carrying case. AC charger is permanently wired into
battery pack.
3. To charge completely, leave AC charger on for 7-10
hours after each use per charging instructions. Always store
battery in fully charged condition. Store battery in cool
place. Recharge stored battery every 3-6 months.
Warranty
800.346.1956
Clover, SC
Rechargeable Battery Pack Light
Rechargeable Battery Pack Light
13 Watt Light with 10' Coil Cord &
Plug Adapter
12 Volt, 7.4 Ah Battery Pack with
110V Charger.
13 Watt Light with 7.4 Ah Battery
Pack
BP_MO4