Avocent DSR Serie Manual De Instrucciones página 2

The following instructions will help you
connect your DSR switch.
Should you require further assistance, please
consult your installer/user guide.
7
Connecting the SPC device to the DSR
switch (optional)
Plug one end of the cable supplied with the SPC
power control device into one of the SPC ports
on the DSR switch and plug the other end into
the SPC device. Plug the power cords from the
target servers into the SPC power outlets. Plug
the SPC device into an appropriate AC
wall outlet.
Powering up targets and switch
Power up each target server and then power up
the DSR switch.
Connecting local virtual media (optional)
Connect virtual media devices to any of the five
USB ports on the DSR switch.
NOTE: To open a virtual media session with
a server, the server must first be connected
to the switch using a virtual media-capable
DSRIQ module (USB2 or USB2L).
For additional information
For further instructions on DSR switch
connection, software setup and security
configuration, please refer to the installer/user
Check our web site at www.avocent.com/support to search the knowledge base or use the online request.
Avocent, the Avocent logo, The Power of Being There and DSR are registered trademarks of Avocent Corporation. All other marks are the property of their respective owners. ©2005 Avocent Corporation. All rights reserved.
All manuals and user guides at all-guides.com
Quick Installation Guide
DSR Switch
®
DSR2035 | DSR8035 Switches
To connect a DSR switch
(continued from reverse side)
Plug in the external
6
modem (optional).
Telephone
Network
Connect the switch
5
to the network.
1
Power down all
servers and attach
the appropriate
power cord to the
DSR switch.
7
Connect the SPC
devices to the DSR
switch (optional).
guide included with the DSR switch. Check
http://register.avocent.com for the latest DSR
switch software and firmware updates.
The Power of Being There
Local
Connection
Modem
Ethernet
Local USB
Connection
Server
Server
®
2
Plug in the keyboard, monitor and
mouse for your local connection.
Connect DSRIQ
modules to the
DSR switch.
DSRIQ
Modules
Connect servers
to the DSRIQ
Server
modules.
Server
3
4