B - Ventilation Air Speed; C - Ventilation Air Speed (Heating Mode); D - Appliance Oscillation; E - Mode Key (Only Activable From Remote Control) - Olimpia splendid FUTURA Instrucciones Para El Uso

After a few seconds of operation of the appliance, the display shows the percentage of detected humidity.
Without pressing any key for approximately one minute, the display automatically turns off lowers its brightness.

3.5.b - Ventilation air speed

Settable speed varies from 01 (minimum) to 09 (maximum).
Remote control
Air speed can be increased or decreased by means of the keys "+" or "-" (A8).
Press the key (A5) to select "Turbo" mode, on the display appears the symbol "HH"; press the key (A5) again
to deactivate the function.
Display
Air speed can be increased or decreased by pressing the key ON/OFF (D1) several times.

3.5.c - Ventilation air speed (heating mode)

Settable speed varies from 01 (minimum) to 04 (maximum).
Remote control
Air speed can be increased or decreased by means of the keys "+" or "-" (A8).
Display
Air speed can be increased or decreased by pressing the key ON/OFF (D1) several times.
In heating mode, the function "Turbo" is not available.

3.5.d - Appliance oscillation

Remote control
While the appliance is running, press the key (A4) and the appliance body starts to rotate alternatively.
Press the key (A4) again, the function turns off and the appliance stops in the chosen position.
Display
While the appliance is running, press the ON/OFF key (D1) for approximately 3 seconds, the appliance body
starts to rotate alternatively.
Press the ON/OFF key (D1) again for approximately 3 seconds, the function turns off and the appliance
stops in the chosen position.

3.5.e - Mode key (only activable from remote control)

3.5.e.1 - Fan mode

To activate this mode, press the key (A6). The temperature shown on the display is WHITE. To change am-
bient temperature, increase or decrease air speed by means of the keys "+" or "-" (A8).

3.5.e.2 - Heating mode

To activate this mode, press the key (A7). The temperature shown on the display is RED. To increase or
decrease temperature (min.1°C - max.30°C), use the keys "+" or "-" (A9). When set, the desired value con-
tinues to blink (approximately 10 seconds) to confirm the setting.
• In this function it is possible to decide whether to increase or decrease air speed by means of the keys
"+" or "-" (A8).
• To activate this function, the temperature to be set MUST be higher than ambient temperature.
>>>>>
EN - 13
FUTURA