Wall Mounting; Window Kit Installation - Jocel JACP-010 Manual De Funcionamento

 WALL MOUNTING
The hot exhaust air can be vented through the wall or out a window. If mounting in the
wall, the height of the hole should be 40cm to 130cm.
WINDOW KIT INSTALATION
The window kit is designed to fit into most standard vertical and horizontal windows.
However, it may be necessary to modify some aspects of the installation process for
certain window types.
1. Open the window or sliding door and adjust the length of the window kit to fit the
opening. Mark and cut down a single panel of the window kit if necessary.
2. Place the window kit between the window and the window frame as shown in the
images to the right. Close the window onto the window kit to form a tight seal.
3. Attach the exhaust duct adapter to the window kit. Tabs located on the adapter will
lock into place securing kit da janela foi concebido para encaixar na maior parte das
janelas verticais e horizontais. No entanto, pode ser necessário alterar alguns
aspectos no processo de instalação para certos tipos de instalação.
All manuals and user guides at all-guides.com
-30-